1) The E-Z 24 Paver Puller

2) Mark location of keyways on paver that is to be removed.

3) Drill marked holes and insert Tapcons®.

4) Engage Tapcons® in keyway, adjusting leveling screws to ensure tight contact.

5) Turn handle clockwise to apply pressure to paver. If paver does not release, tap surrounding pavers with a rubber mallet to break seal.

6) Turn handle clockwise to lift paver up until fully released.

7) Lift E-Z Paver Puller by the handle to completely remove paver. Lower paver down and loosen leveling screws to disengage Tapcons® from the keyways.