1) Drill a hole near the center of the paver to be removed and insert a Tapcon® concrete screw in the hole.

2) With the lift plate lowered, place the E-Z Paver Puller so that the feet rest on either side of the paver to be removed.

3) Slide the E-Z Paver Puller until it engages the Tapcon® screw head(s) into the keyhole slot(s). (Use the center slot when using one screw. Use the two side slots when using two screws.)

4) Rotate the handle clockwise applying firm pressure to the paver.

5) Turn slowly until the paver breaks free.

6) If pavers have been sealed or are held in place with polymeric sand, it may be necessary to tap the surrounding pavers with a rubber mallet in order to break the seal.

7) Lift up on the turn handle to remove the paver.